Model Ei262 CO Alarm
x Wireless interconnection to RadioLINK smoke, heat & CO
alarms
x Tamper-proof rechargeable Lithium battery back-up
x RF Remote Control Capabilities
x Proven electrochemical sensor
x Unique easy to replace sensor module
x Memory feature records if CO has been detected
x Easy to use Test/Hush button
x Easi-fit base
x Pre alarm LED gives early warning of CO
x Loud distinctive alarm sound (85 dB(A) at 3 metres)
x Power, alarm and fault indicator lights
x Kitemarked to BS EN 50291:2001
x 5 Year Guarantee
Product Description
The Ei262 is a Carbon Monoxide (CO) alarm powered by 230V AC mains. The
rechargeable Lithium back-up cells are designed to have a ten-year life and
outlast the life of the CO alarm. They will provide up to 4 weeks of CO alarm
operation without mains power.
The alarm uses a high performance electrochemical sensor to sense CO
presence. The sensor can be replaced after 5 years to provide a combined 10
year protection against CO gas.
The alarm has RadioLINK interconnectivity which enables wireless transmission
of a CO alarm condition to all other wireless CO, smoke and heat alarms in the
system.
The alarm also has RadioLINK Remote Control capability - allowing the alarm
to be controlled remotely from a Control Switch (Ei412). This allows remote
Test, Locate and Silence functions to be performed on all RadioLINK alarms in
the system. A Manual Call Point (Ei407) is also available.
The alarm is supplied with an Easi-Fit base that allows quick and simple
installation of the alarm, combined with simple removal and replacement. The
Easi-Fit base automatically connects both mains power and battery back-up as
the alarm slides on to the base.
Operation
x The green indicator will illuminate to show mains power is present
x When in alarm, the Ei262 will send an alarm signal to all other
RadioLINK enabled smoke, heat and CO alarms that have been
House Coded together. (only the triggered alarm will flash a red
indicator)
x The horn will sound and the red indicator will flash at different
speeds to indicate the presence of various levels of CO gas – see
overleaf.
x The horn will beep and the amber indicator will flash every 40
seconds to indicate a fault on the sensor
x The horn will beep every 40 seconds to indicate the battery back
up is depleted and needs recharging
x The “Test/Hush” button will either silence false alarms (if briefly
pressed) or perform a unit self test (if pressed and held). Note that
the alarm cannot be silenced when sensing a CO level of 300ppm
or above
x Memory Feature – after the unit has been in alarm, the red
indicator will flash every 40 seconds at a rate indicating the CO
level previously detected. Pressing the “Test/Hush” button will also
cause the red indicator to flash at a rate specific to the previously
sensed CO level.
Mains 230V~ with Rechargeable
Battery back-up
Wireless Interconnection
Carbon Monoxide Alarm
E & OE Our policy is one of continuous improvement. Ei262 DataSht Rev0 15.03.10
We reserve the right to amend designs and specifications without prior notice.
Mile End Business Park, Oswestry, Shropshire SY10 8NN Tel. 0870 758 4000 Fax. 0870 758 4010 www.aico.co.uk
(32 Seiten)
(12 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern